InnoGuard Terrain
Debris Guard
£400.00
Key Features:
Height Limits: 0 mm to 300 mm
Weight: 1.3 kg/m
Main Body Material: PVC, Galvanized steel
Drainage: Curtain design allows water ingress
Relocations: Easily removable and reusable thanks to height adjusters
InnoGuard Terrain is a practical solution designed to block the gap beneath cycle shelters installed on extreme uneven ground and prevent debris penetration into the shelters while allowing water ingress to ensure highway drainage requirements are met. InnoGuard Terrain's smart design provides low installation and mantainance costs, while allowing for flexibility in refitting to accomodate for varying ground levels.
Thanks to its bespoke mount-to-hangar design, InnoGuard Terrain can be installed in any existing hangar, with external dimensions not exceeding 2500mm in width and 2200mm in depth. InnoGuard Terrain is sold as a three side unit to cover the three carriageway sides of a kerb-mounted shelter. The additional side for four-side protection can be installed upon request.
InnoGuard Terrain's main body is made of a set of PVC strip curtains which block litter and unwanted material from entering the shelter, while still allowing rainwater to pass through, helping to eliminate ponding and reduce maintenance requirements, to adhere to the requirements set in TfL's LCDS Chapter 8.
InnoGuard Terrain's PVC strip curtain and height adjusters' design allows for uneven terrain coverage for uneven ground from 0mm up to 300mm in height and can be easily readjusted to fit new levels if the cycle shelter is relocated. Its low weight and modular design allow for low installation costs. It is also fully demountable, making it easy to remove and reinstall in new shelters. This flexibility makes InnoGuard Terrain ideal for both permanent and temporary installations across residential, commercial, and public settings in uneven terrain.
PVC curtains are corrosion resistant
Curtain design allows for water ingress while stopping debris
Curtain design allows for system to mould to extreme gradient changes
Height adjusters allow for installation in varying heights
Height adjusters allow for refitting following relocations
Designed in accordance to TfL's LCDS Chapter 8 - Cycle Parking
Designed and manufactured in the UK
Height Limitations: From 0 mm to 200 mm
Width: Made to fit cycle shelter
Weight: 1.3 kg/m
Contact sales@innoformengineering.com for additional information to get a formal quotation for your needs.
A full product brochure and specification is available upon request.
